AE Paint a panel at a time.
With that small compressor, are you reducing,& at what percentage, Greg?
I tried right out of the can, but I was getting too much orange peel so I reduced by 25% and it seems much better now.
The instructions on the can say it can be reduced that much, but I wanted to try it without first. (wasn't good) :D
Section at a time at 40 pounds seems to work nicely, and the compressor doesn't take very long to recover so that helps a lot.
I'll rent one for the big panels like the sides and hood if I need to.
Pretty soon you'll be ready to :burnout:
The car already :burnout: but it'll :burnout: even better with what's coming today.
I got an approximate 90k mile 5.9 magnum getting delivered today, but it's going to get torn down for inspection first and reassembled with a different cam, new timing set and possibly a quick hone and new rings.
That's the plan anyway, but we'll see what reality has to say about it obviously. :D
Then a week after that it'll probably destroy the 7.25 one legger, but I can get a 8.25 disc brake rear end complete for about $225 and I can cut it down and mod it here. (probably send the axles off for shortening)
It's going to stay a tall geared driver, so no need to get carried away with it.
I don't hot rod it much (maybe a little tire smoke once a month)