1969 Dart Street/Strip (Re)Build
Since I had previously repaired the shock tower support and frame, I needed to grind any welds flat. This was the passenger side. Luckily I didn't cover the hole!
Back on the driver's side I started installing the bushing through the shock mount hole. I used the bolt to get it in place. This was NOT necessary. All you need to do is tap it with rubber mallet from the top side. Goes in easy.
Since I had previously repaired the shock tower support and frame, I needed to grind any welds flat. This was the passenger side. Luckily I didn't cover the hole!
Back on the driver's side I started installing the bushing through the shock mount hole. I used the bolt to get it in place. This was NOT necessary. All you need to do is tap it with rubber mallet from the top side. Goes in easy.
