TTI headers hitting torsion bar 65 cuda with 360

Yes it is a v-8 K frame as far as I know. I was a 273 car supposedly.
I just opened up the motor mount slots to try and get the engine to sit lower, it did not help, we then just took out the complete motor mount bracket that attaches to the engine, elongated the holes to shift it up and reinstalled. that lowered the motor a little over a 1/4 inch.......gave me a little more room but the pipe is still just touching the torsion bar. really frustrated with these headers......I will resort to ding with the hammer but to do that the headers will have to come back out, no easy task....
before we do any more we are going to fit the steering column back in and see if there are any clearance issues with that (have seen posts about problems with those not clearing pipes) before I mess with anything else.