SRT8CUDA Build

After installing the deck lid, interior and all the soundproofing, I found that the rear of the car was sitting too low. Even after cranking up the coil spring all the way - it was still too low.

I sent an e-mail off to Bill Reilly at RMS, and he got right back to me to check the center to center distance on the shock (should be 11.5" - 13"). After looking at the photos etc, he confirmed that I need stiffer rear springs. They will be coming my way - no charge. All part of buying the rear suspension setup:)
I may also have an issue with the axle vent hitting the tail pipe. Hopefully I will have enough clearance when I get the car sitting higher. If not, maybe I can rotate the tail pipe to clear the vent. I sure don't want to move that vent now!!!