1967 Cuda FB project

Today I decided to see how the rear bumper is going to shape up. Test fit the OE bumper to gauge looks.
View attachment WP_20160423_003.jpg
View attachment WP_20160423_002.jpg
View attachment WP_20160423_001.jpg
View attachment WP_20160423_005.jpg
Then saw that there was quite a bit of open area between the bumper and body. Decided to affix the bumper to the body with no seams. The area under the bumper would still be at least an inch short of reaching the bumper so I cut that part out so it could be moved back to flush up with the bumper.
View attachment WP_20160423_008.jpg
View attachment WP_20160423_010.jpg
View attachment WP_20160423_009.jpg
Next, I sectioned the bumper so it would fit the body better. About an inch has to come off of each side. I also cut the tips off so I could make a longer, smoother transition into the quarter panel.
View attachment WP_20160423_011.jpg
View attachment WP_20160423_012.jpg
Back out after lunch to do some more fitting. :glasses7: