Another small block stroker combo to ponder.

I am digging in the garage trying to use up 40 years worth of leftover parts and trying to group them into specific combinations so I know where I'm headed and what else I need to complete them. I have a 360 Magnum block thats already bored .030 and has new freeze plugs and everything else. I also have a new set of Eagle rods for the pressed pins.I have a set of KB 356 pistons with the 23.5 cc dish and a quench dome, I have a new set of Edelbrock performer RPM heads for the Magnum with 58 cc head volume. I have a Performer RPM air Gap for carb and also a Hughs performer RPM air gap for Fuel injection. And I have a couple of new Hydraulic roller cams, one is a Mopar performance one thats 498 lift and the other is a Comp thats right over 500 lift, I will have to get the cards out with the specs. I also found a set of high dollar Magnum Roller rockers with the stock 1.6 ratio. Does this sound like something I could build a usable combo out of and what other parts might I need?