Stop in for a cup of coffee

zkx14 said
What is contacting. Sidewall, tread? different brands vary, but from what I see that tire is probably close in width to mine but over 2 inches taller. so more than an inch + on radius.
Did you change your gear for speedometer? At what point do you need to do that? I would need to get better measurements, but I guestimate mine will run speedo will be under what it was with 195/75/14 by a couple mph. of course that is not the correct tire either. lol

I am pretty sure it is the poly strut rod bushings doing it, pass side tire seems more forward and rubs on the tread in a hard turn. Spedo gear I had to change to a 33tooth. Just measure your tires and gear ratio and use a chart on line tells you what you need. That's with the 323 gears sure I have to change it when the new gears go in still on the fence of 3.55 or 3.73 have both.