Q: Ford Solenoid Switch in Lieu of Mopar Starter Relay?
Could also use a BWD 113, I had a replacement starter relay fail on me and I will be going the remote solenoid route. Also thought of using a standard Bosch relay, but with multiple wires running to the hot post (alternator charge wire / headlight relay power / hei ignition relay power etc...) on the original starter relay the solenoid will make for a little cleaner installation...
Here's one of the AMC with NSS. AMC used Torqueflites. This is essentially a Ferd solenoid with one end of the coil hooked to that extra pin "out the back" instead of grounded at the bracket.
This "might be" an SS-590 Standard
A'nudder view
Could also use a BWD 113, I had a replacement starter relay fail on me and I will be going the remote solenoid route. Also thought of using a standard Bosch relay, but with multiple wires running to the hot post (alternator charge wire / headlight relay power / hei ignition relay power etc...) on the original starter relay the solenoid will make for a little cleaner installation...