1972 Canadian H-Code 340 Dart Swinger Special Resto - Finally started!
Then I decided to get a bit anal and rebuild the edges of the boxes that had holes blown thru by the factory boys and there hot welders. I didn’t have a large flat copper welding plate so I took some 3/4 inch copper pipe and flattened and folded it over my dolly and used that to backup my mig weld filling of the holes and areas that were missing.
Quite a bit of work but it turned out pretty good and they should be pretty close to when they were first installed and I’ll spend a bit more time then the mopar guys had to weld them in.
Then I decided to get a bit anal and rebuild the edges of the boxes that had holes blown thru by the factory boys and there hot welders. I didn’t have a large flat copper welding plate so I took some 3/4 inch copper pipe and flattened and folded it over my dolly and used that to backup my mig weld filling of the holes and areas that were missing.
Quite a bit of work but it turned out pretty good and they should be pretty close to when they were first installed and I’ll spend a bit more time then the mopar guys had to weld them in.