TTI headers hitting torsion bar 65 cuda with 360

I ended up denting the passenger side headers to give the torsion bar some clearance. The drivers side had to be flattened so it would not be rest against the frame.
The steering box to steering column joint hit the header pipe, I ended up taking that out and used a borgeson universal joint to replace it to give me more clearance.....that still hit and I had to dent that header pipe for that too. The installation of these headers was totally ridiculous. installation finally complete. I also installed the matching 2.5 inch full exhaust with X pipe. I used Dynomax ultraflows instead of the dynomax normal muffler they normally supply. The installation of the exhaust system was no picnic either, I had to cut and re-weld to spread the X pipe assembly so it would fit the rear part of the system.