Slant 6 Turbo... Tight quarters. I could use some pointers

Thanks 67 and I had to chuckle at the down low reply. Believe me...I have googled just about every image there is lol. I've seen and studied the image that you attached. Problem with that one is that the duct work won't clear my doghouse panels and on either side of the doghouse is the fender wells.. If I could turn the ducting off the turbo 90 towards the radiator it might work..

Not mine but you can see what I'm working with here. Keep in mind that it is a little more open down low.


I've read enough to understand that I need to be above the oil. I think the first slant turbo project I read was over on slantsix.org. several years ago. It was Waynes "$400 slant 6 turbo setup" which is basically a junkyard build. Something about it just seemed nostalgic and would just "fit" if I could make it fit. In the pictures that are attached with that article, I saw this...



Now I know that particular article is pretty outdated and the pictures with it are horrible but this is just about what I need to achieve in order to fit. Something about this picture just looks a bit off tho.. Is this achievable? I question it because it's the only setup Ive came across like it