electronic ignition swap on a 64 Valiant..........CANT GET TO RUN.....HELP

As Del suggests, the problem is in the run circuit where the ignition "on" feeds the ballast to the coil, in "run". I think I see something in the next to last picture at bulkhead. The black wire ( tapped from blue) seems to go down on way to ballast, and at point where the choke cable is it seems to shrink. It could be an illusion, but it looks like what happens for a short.

A very simple test: place test light at bottom terminal at ballast, other lead to ground, turn ignition to run, it should light. If not check at the blue wire at bulhead, if none there, first place to check would be at bulkhead connection, next ignition switch.