10 Day Magnum Swap - '65 Dart 270

Okay I wasnt imagining things. It was over in the 64 Dart GT swap thread. His experience/post noted that:

The manifolds will bolt right on but will have a 1/4 inch open spot underneath where there is a port mismatch. These are the 69 hipo manifolds I'm talking about.
I made 14 gauge steel plates and cut the hole to fit the head port size and the cut the outer edge to fit the manifold.
A better bet would to use magnum manifolds, if you can find some to fit.


Yay, nay?