Gerahead's 71 Dart
I seriously want to get the underside of the car blasted, primed and painted before the summer is gone. So tonight I put together a punch list of the things that need to be done before I start spraying media, then I got started on it. I worked on getting the last of the undercoating stripped from the passenger side wheel well. Most of it had been removed previously with a pneumatic gasket scraper. I filled a non-aerosol sprayer with naptha and hosed down a portion of the wheel well.
Then I used a grey scotchbrite pad to scrub up and loosen the remnants. Then wiped it down with a shop towel. After several rinse and repeat cycles, I got it pretty clean. The process works really well, but lots of manual labor.
I seriously want to get the underside of the car blasted, primed and painted before the summer is gone. So tonight I put together a punch list of the things that need to be done before I start spraying media, then I got started on it. I worked on getting the last of the undercoating stripped from the passenger side wheel well. Most of it had been removed previously with a pneumatic gasket scraper. I filled a non-aerosol sprayer with naptha and hosed down a portion of the wheel well.
Then I used a grey scotchbrite pad to scrub up and loosen the remnants. Then wiped it down with a shop towel. After several rinse and repeat cycles, I got it pretty clean. The process works really well, but lots of manual labor.
