76 duster window sweeps

Wanted to add an FYI... I had noticed some water on the floor before I fixed the sweep position, but thought it was the glass adjustment. Turns out it was coming in between the new sweep and the door, not at the glass. it ran down the glass, followed the regulator and then came out between the door and the interior panel. So, I ended up taking the fuzzy off again and put a bead of RTV silicone behind it and added a couple extra screws. Don't see how they really expect it to seal good there but no worse than original. Looking at water stains on the old panel it was doing same before, just not quite as bad. I still plan to ad something at the back end of the glass where (by original design) there is a gap that allows water to go in, flow down over the latch and out the bottom. Will probably add sealant on passenger door as well even though its dry so far. Might just have been the direction the rain was coming from...