Brake Hub help please! Sbp to bbp
Ok, did some searching. The Scarebird setup does not use Caprice rotors. This PDF claimed it did, but the rotor part numbers given are for a Toyota Previa DX (no to be confused with LE) without ABS, from 1991-94. Further searching confirms this.
Centric usually publishes their rotor specifications in their stock images, so I found the corresponding Centric number 121.44070. Unfortunately, not much to go on:
At this point, it might be worth it just to start a new thread with the thread title "Will B-body drum hubs fit an A-body Kelsey-Hayes spindle?," and link back to this one. Once you get that answer and the measurements, might be worth it just to pick up a pair of hubs, because it'll be easier to buy the Previa rotors and find out at that point.
I'll bet that even if the Previa rotors don't fit, there's a 5-on-4.5" rotor out there that will work.
Then there's the possibility that there's a one-piece rotor out there with a 5-on-4.5" bolt pattern that'll slide right onto the Kelsey-Hayes spindle.
-Kurt
Ok, did some searching. The Scarebird setup does not use Caprice rotors. This PDF claimed it did, but the rotor part numbers given are for a Toyota Previa DX (no to be confused with LE) without ABS, from 1991-94. Further searching confirms this.
Centric usually publishes their rotor specifications in their stock images, so I found the corresponding Centric number 121.44070. Unfortunately, not much to go on:
At this point, it might be worth it just to start a new thread with the thread title "Will B-body drum hubs fit an A-body Kelsey-Hayes spindle?," and link back to this one. Once you get that answer and the measurements, might be worth it just to pick up a pair of hubs, because it'll be easier to buy the Previa rotors and find out at that point.
I'll bet that even if the Previa rotors don't fit, there's a 5-on-4.5" rotor out there that will work.
Then there's the possibility that there's a one-piece rotor out there with a 5-on-4.5" bolt pattern that'll slide right onto the Kelsey-Hayes spindle.
-Kurt
