nope....none yet. I did put together an actual high pressure hose for the power steering and swapped out the 110lb springs for some 150lb QA1's...... much better than before. I think I'm going to put my original 170lb springs back in, the 150's at ride height measure right at 8" compressed which on a 12" spring is at the max compression of 33% recommended. The 110's were cranked up to 6" compression or 50%....way too much. The 110's yesterday were bottoming out on dips in the road, today with the 150's everything was great. I assume by saying "scraping" your referencing oil pan, headers, ect...none there either. it's all getting dialed in so by next spring it will be 100% ready to go.