Is there a specific intake that goes with 915 heads?

The same 2806178 intake manifold was used on all 4-bbl 440 engines 1967-69.

To use one in a performance application above 3,000rpm is nuts......unless the rules require it. I flow tested the 2806178 on a service prepped RPM cylinder head using an 850 Mighty Demon carburetor. Then I tested the same port of the cylinder head using a RPM dual plane, Torker II single plane, M1 single plane and the Victor single plane, all with the same 850 4-bbl. Below are the cfm results.

Lift.......6178.......RPM......Torker II......M1.......Victor
.100......69...........71..........71...........72.........72
.200.....131........145........148..........148.......150
.300.....172........195........201..........202.......202
.400.....187........228........242..........232.......240
.500.....199........240........254..........254.......261
.600.....203........251........264..........266.......271
.700.....204........256........269..........273.......280