1974 Duster

Checking the car over close I found that the kickdown lever was not going back as far as it could with the throttle! There was a 3/8" gap due to the adjuster being all the way out. Rummaging around in my stash 'o parts I found a rod that was an 1" longer and swapped it out.

Much better!

Inspecting on the lift there was some fluid coming out of the bellhousing area, looks like the vent puked a little bit. Fluid level was over 5/16" of an inch over the full mark, DOH!

I'll have to drain some out, I was actually aiming for a touch over the "add" mark.

Aside from that, she's running great! Thinking about tossing in a set of 1.7 ratio roller rockers for a bit more power. =)

Gary