416 stroker cam choice

There is a lot more to it than just bolting a bunch of stuff you have together and expect a good result. Whats the LSA? Whats the duration at .050". Whats lobe lift or is .528" calculated at 1.6? . Factory injection is very picky about LSA and centerline. The injection was designed to work with a hydraulic roller as well. The difference between a FTS cam vs Hyd Roller is huge, lobes look completely different and thus have completely different manners. This can be bad when your fuel table is determined by a MAP sensor.

Sport74, you dont need a website to figure out different ratios. Just take lobe lift x ratio or if your cam lift is spec ed at 1.5 and you want to know lift with 1.6, simply divide lift by 1.5 and multiply by 1.6 or vise versa.