There is a lot more to it than just bolting a bunch of stuff you have together and expect a good result. Whats the LSA? Whats the duration at .050". Whats lobe lift or is .528" calculated at 1.6? . Factory injection is very picky about LSA and centerline. The injection was designed to work with a hydraulic roller as well. The difference between a FTS cam vs Hyd Roller is huge, lobes look completely different and thus have completely different manners. This can be bad when your fuel table is determined by a MAP sensor.
Roccodart....But it would not be great with injection, even with 112 LSA, factory injection is timed to have roller cam grind, it needs valve opened quickly so you get max shot of fuel in chamber, not gradual opening of flat lobe design.