360 build

Originally I built this engine for my van but I decided that that was a waste and purchased a duster. I decided to throw a more significant cam at it and save as much of the original build as I could. I'm working close with my machinist to make sure it's not scrap metal as soon as it starts up. This isn't an ideal build at this point but I'm curious if someone has run something similar and to what general results? My goals are burnouts, hooliganism and mayhem.

Initial build:
-.060 360 LA
-EQ magnum heads w/2.02 valves measured 62cc
-stock magnum rockers
-Stock resized rods w/arp bolts
-Kb232 pistons .025 down
-Comp xe268h cam

Currently:
Milled heads to 60cc
Recommend by lunati beehive springs
Lunati 60412/20200712 which is a retrofit roller 282/290, duration @.50 231/239, .535/.550 lift, 110lsa
Should be 9.65:1 compression
"2500" stall
391 gears

I'm not a professional engine builder and in hindsight I would have done things a little different but these are the cards dealt to myself.