New clutch setup won't disengage

I think 1 inch is not enough travel.But it might just barely be.
Going from memory and guesswork;
If you figure the clamping pressure of the CF is 2800#, and your leg pressure is 60#, then you need a total ratio of 2800/60=about 47:1
I think the pedal ratio is about 7:1, and the Z-bar is Zero, so 47/7=6.7 left in the fork and pp. I'll guess the fork is 2.5:5.5, so 2.2, and 6.7/2.2 = 3:1 in the pp; and that looks doable.
Now then;3/1 x 2.2/1 x(.080+ say .060freeplay)= .924 travel at the outer socket of the fork,and going up the line, this would be 7 x .924=6.5inches at the pedal. Well I don't think you have that much, so maybe there is a bit more than Zero in the Z-bar.
Bottom line is 1 inch at the fork should do it.
Did I mention I'm going by memory and guesswork?