1965 MMP's Barracuda Hemi swap! The Ever Changing Build
Okay so I was out taking measurements to order the spacers needed to fit the wheels to the Barracuda turns out I need 3/4 or 20mm spacers. Not a problem, parts ordered and should have them tomorrow. But while under there something billet and shinny (compared to the rest of the dirty undercarriage) caught my eye...?
I found about $300 worth of Mallory fuel pump and filter setup under the car..
Now I'll be pulling this off cause I'm going in-tank 255 Liters Per Hour EFI pump setup for my build so if anybody want this let me know I'll let it go for a reasonable price. I will of coarse clean it an check to make sure it all still works.
Let me know if your interested.
The pump is a 110 CompPump
https://www.summitracing.com/parts/...9zILvffHzeGsH5oAjWJUgVylO0K0xo24AgaAqdA8P8HAQ
And the filter is a 140 CompFilter
MSD Ignition 29247: Mallory Fuel Filter and Housing Comp 140 | JEGS
Okay so I was out taking measurements to order the spacers needed to fit the wheels to the Barracuda turns out I need 3/4 or 20mm spacers. Not a problem, parts ordered and should have them tomorrow. But while under there something billet and shinny (compared to the rest of the dirty undercarriage) caught my eye...?
I found about $300 worth of Mallory fuel pump and filter setup under the car..
Now I'll be pulling this off cause I'm going in-tank 255 Liters Per Hour EFI pump setup for my build so if anybody want this let me know I'll let it go for a reasonable price. I will of coarse clean it an check to make sure it all still works.
Let me know if your interested.
The pump is a 110 CompPump
https://www.summitracing.com/parts/...9zILvffHzeGsH5oAjWJUgVylO0K0xo24AgaAqdA8P8HAQ
And the filter is a 140 CompFilter
MSD Ignition 29247: Mallory Fuel Filter and Housing Comp 140 | JEGS