a904 stator sealing rings...

TrailBeast said
Did you inspect the sealing surface and test fit the rings in the drum before you used them?
You asked this before and I mentioned that a lot of air does get by those rings where fluid doesn't nearly as much.
If you have the "thud" on the apply with air you are probably ok.

Believe it or not, Teflon rings are a lot harder on the metal surfaces than the steel rings and in my opinion leak more.
Click to expand...
Ok there is a thud. Not as strong as i would have liked. @45 psi applying yp to 60 psi. Tried pouring fluid down passage ways the air checked. I took a bath in fluid. No i didn't test fit the rings 1st. Didn't. Think of it. So it sound like i will be ok. I guess i can. Carry on. And install the valve body. And get my ptc converter ordered. 9.5 " 2200-2400 stall.