340 dyno chart thoughts

QUOTE="frosty_the_punk, post: 1971503537, member: 14103"]are you really saying lunati spec their solid cams @ 0.006" lobe lift instead of 0.020"?

View attachment 1715001757[/QUOTE]
Hmmm what's this in the Lunati cam catalogue?



Funny that.

frosty_the_punk said

Face it fella, you're all over the place. First you're comparing a mild comp hydraulic flat tappet cam to a hughes solid flat tappet. Then when you don't have the advertised duration specs, So you try to borrow them from the other lunati cam which is a solid ROLLER cam with similar 0.050" specs.

Two thumbs up for your efforts. Every circus needs a clown.

Click to expand...

All over the place? Says the guy who says I'm wrong in how I measure it, then I'm right. Who tells me the IVC on a comp cams is 45, when the website lists it as 63 (I trust comp over you). Who says a bigger cam with more duration has higher compression than a smaller cam with less duration. Who basically just repeats back what I said and tries to sound smart about it (you don't). Shall I go on? Oh P.S I have the hughes advertised duration, I figured them out. You can't?

I was really honestly going to try and teach you how to find IVC on any cam using @.050 duration. I honestly did want to help you. Like I said. I like to help people understand engines and how they work. You obviously "know" enough to not need any help at all.

I honestly wish you good luck. You're, gunna need it.