Rear coil over shock spring rate
- Thread starter rick4106
- Start date
-
famous bob
mopar misfit
------------anyone ?---------------
You're one up on me; I don't even remember what rate mine are. Good luck.
Mopar Al
MOPAR AL
Mopar Al
MOPAR AL
I did 4 link on 73 Dart with coilovers and used 150# in rear
3402
Well-Known Member
'71 Duster 2860# (3100 with driver) ladder bars, Think mine were 120's, remember thinking that seemed pretty light, but they worked good. Best bet would be to call or email some of the chassis places and see what they suggest.
bOb shingler
Well-Known Member
110
MidTexCuda
Ancient Member
you need to know the weight of the rear of the car then call the shock maker. This will be impossible without four corner scales. There is another way to get you closer. btw 150lb spring sound way to stiff.
Use these two links to understand the concept
https://www.cachassisworks.com/Attachments/Instructions/899-031-226_drag.pdf
BaselineSuspensions.com.........Launching A Drag Car
Use these two links to understand the concept
https://www.cachassisworks.com/Attachments/Instructions/899-031-226_drag.pdf
BaselineSuspensions.com.........Launching A Drag Car
mopowers
Well-Known Member
Since this is in the racing forum, I'm guessing this is a race only car? As said, you really should get the rear sprung weight of the car to choose a set of springs.
-
