HEI distributor

I did the HEI conversion on my 87 Ramcharger, from the lean burn system. You cannot use the existing coil wires directly to the new E-CORE coil. it is a resistor wire and you will burn up a coil and or module. (i learned the hard way) Along the driver's fender, near the lean burn module, there is a 3 prong-female connector that I used. Key on it has 11.6-ish volts, but when running will have 13.8-14.1V. at least that is what mine is producing. Been running mine from that connector for thousands of miles and zero issues once I started using that power source.