Cam choice for low comp 360?

https://www.summitracing.com/parts/dcc-4452992/overview/
I used this cam twice in 318's. One with 318 heads, one with cut 360 heads. Used stock pushrods, rockers, and springs. Worked fine both times. I also put one in a 360 with 340 heads, and put one in a 340.
Not a bad idea to have the heads set for .500 lift, just to be sure. I only did once, all the other times no and maybe I was lucky. You'll loose some lift on the stock rocker assembly.
I did upgrade springs on a couple of the listed above, and I recommend it.