Cam choice for low comp 360?

318willrun said

Stock pushrods will work with many of these cams.
You'll find there are many cam grinds that will fill your bill. Competition, Lunati, MP, Crane, and more that will offer "off the shelf performance" to make you smile. IF you want the EXACT cam to match your EXACT application, you can always call a cam grinder and get one custom ground.

Click to expand...

Thanks. I'm also planning on following your port videos for my heads. I have found both the XE262H and the XE268H with lifters, springs and gears on Ebay with reasonable shipping over here to Sweden. There aren't really any cam grinders around here so that's a no go. Comp Cams seem to have the best price on their of the shelf kits if I am not mistaken. There is very little difference in performance CamQuest between the two Cams. More torque with the smaller one and more HP with the slightly bigger. I will probably go with the XE268H and my 3.73 gears, porting and mill the heads .030".