Another magnum swap thread

Alright.. I've looked everywhere and have yet to find the information that I, and I assume others, are looking for. There are tons of write ups on swaps focusing on the physical swap. I can handle that part, but I'm more concerned with the wiring aspect.

I've seen Magnum Mopar's harness and it's a beautiful piece, but with my current poor college kid budget, going that route is out of the question. What I would love to find is a list or diagram of what wires need to be removed from the harness, and wind up with something like a 4 wire hookup as is the case when you modify a LS harness.

The engine I want to swap is a 318/46RH out of a 93 Dakota. I have multiple Mopars so this wouldn't necessarily be going into an A-body, but the wiring would obviously be the same other than slight length differences.

I guess what I'm attempting to start here is a thread to compile any and all information you guys have regarding wiring these things. The lack of good information on this is the reason that full factory swaps are virtually non-existent. It could easily be as simple as swapping an LS.