Help with leaf spring selection,

My new Mopar Performance leaf springs are installed. I used the correct aftermarket hangers designed for these springs which are shorter to accommodate for the 20.5" front segment. I used the upper eye on the hangers to give the lowest stance with the spring. I installed 1/8" alignment plates in front of hanger for a little more tire clearance, I really like how it looks with my 28" tires. The rear end of car at wheelwell is 1 1/8" taller than with my split leaf Cal Trac stock ride height springs. I expect springs will settle out a little in time. One thing I noticed is my pinion is now pointed upward quite a bit so I will be needing wedge shims to correct this. There is also very little weight on car right now as fuel tank and spare tire are out as well as engine and transmission.

I was very pleased with fit and finish of springs, mine were dimensionally identical and paint work and finish is quite nice. So far I am pleased with results.