cam choice for a fuel injected 340/416

pat d said

looking for a cam shaft that will work with 340/416 stroker and some what stockish mopar fuel injection ??? motor is about 10.5-1 compression will have a different intake single plane for fuel injec ported throttle body and poss bigger injectors and i want it as street friendly as poss like {daily driver} also flat tappet or hydr or roller this motor is going into a truck any suggestions ???

Click to expand...

I'm running a Hughes cam with 252* @ .050, 560+" lift ground on a 108 degree centerline in my 10.25 to 1, 408 inch Mopar with an Airgap, Big Mouth throttle body, 40 lbs Ford Racing injectors, Hotwire Auto Hotrod harness with a reflashed 1998 manual trans truck PCM. It's my 3700 lbs daily driver.

The motor spins a modified 200R4 with a 3600 rpm lock-up converter and 3.91 gears. It hooks up hard on the street with 275/60-15 Nitto 555's.