Father-Son 1974 Duster Project

HemiDenny said

Never fear.....you won't need drawings. They only go on one way, almost dummy proof.

For the fuel line....slide the front thru the hole in the trans crossmember on the passenger side and snap it in place . Helpful if you do not have the leaf spring in. Only a PIA if you have frame connectors which you clearly do not.

Brake lines are even easier.

Remember these cars were not designed....and built by rocket surgeons back in the seventies

Gotta go....20 minutes till Judge Wopner.

Click to expand...

Denny I think you're giving me way too much credit on the dummy scale....
As i knew when we installed the motor and trans, I had the cross member rotated right for left. I realized it when the bolts to the frame only lined up with on hole on each side, but left it deciding I should get new trans mount at one point and the car was far from firing anyway. That was nearly 20 months ago. I ordered my radiator, power steering hoses and belts, but forgot to get the trans mount. I'm sure the local napa has one or can get it by tomorrow. Then we will see how simple the line install can be! I do have all new hardware to fasten it that I got from R/T Specialties.