A-833 4 speed linkage questions

You will notice that I had to add a bend to the 1-2 rod to clear the crossmember, and yes the reverse rod can be seen in the installed pic. I didn't see the need to make a fancy reverse rod, it is stock.

Anyone with a bench vise and hand drill can make these with some patience. You can buy mild steel rod at most hardware stores, source the rod end bearings from somewhere (I used removed helicopter parts but you could likely find some online or at harbour freight). Cut the rod with a hacksaw, buy some threaded rod, drill and tap the rods, add threaded rod extensions and rod ends and voila.