66 Dart

Okay so today after the MMO, wd40, and liquid wrench have sat in the engine for 4 days I once again attempted to get the crank to turn a bit using a breaker bar. It didn't even budge. The entire car is rocking but it's not budging at all.

I lifted the rear end and got I on blocks. Put the car in drive and was able to roll both tires and I can see the drive shaft rotating.

Tomorrow I'm going for the inspection plate on the bottom side and I'm going to attempt to move the fly wheel and see if that budges.

Any other ideas other than simply giving the lubrication more time to work?