1967 Barracuda Formula S 383 daily driver build
Took the Barracuda out & about around town Saturday just tinkering with the timing, trans shift points & carb. It's running really good, pulls good and all. But after checking out stuff tonight it seems my crack has grown. I'm going to take my other 383 I have up to the machine shop Monday & just have him prep it & I will just swap all my stuff out & into it.
Little dirt road to the shop.
I cleaned the old crack with brake kleen 2 weeks ago to get all the blue engine paint off then since it pretty much is non-visible as bare metal I used a white paint pen to outline it. Seems the whole side of the block was weak from a water freeze at some point in the past. Glad I decided to drive it a little before pulling it & getting it repaired.
Took the Barracuda out & about around town Saturday just tinkering with the timing, trans shift points & carb. It's running really good, pulls good and all. But after checking out stuff tonight it seems my crack has grown. I'm going to take my other 383 I have up to the machine shop Monday & just have him prep it & I will just swap all my stuff out & into it.
Little dirt road to the shop.
I cleaned the old crack with brake kleen 2 weeks ago to get all the blue engine paint off then since it pretty much is non-visible as bare metal I used a white paint pen to outline it. Seems the whole side of the block was weak from a water freeze at some point in the past. Glad I decided to drive it a little before pulling it & getting it repaired.
