Headlight switch - 75 Duster - Stumped...
I don't think that can be. Terminal P supposedly isn't used and when I ring it out from B1 to P I get no continuity either. The terminal marked H is only on (continuity) when the knob is pulled all the way out, hence it's for the headlights.
Here's a photo I found when searching for the pinout on the internet, it's what I followed to wire the switch but when I check for continuity I only get an output to terminal H (headlights) and nothing else. The only other terminal that did checked out was D which is used for the dome light, that terminal has continuity to ground when the switch knob is turned completely counter clockwise which makes sense.
I have to be doing something wrong because both the new and the old do exactly the same thing and the old one worked before I ripped all the wiring apart.
I don't think that can be. Terminal P supposedly isn't used and when I ring it out from B1 to P I get no continuity either. The terminal marked H is only on (continuity) when the knob is pulled all the way out, hence it's for the headlights.
Here's a photo I found when searching for the pinout on the internet, it's what I followed to wire the switch but when I check for continuity I only get an output to terminal H (headlights) and nothing else. The only other terminal that did checked out was D which is used for the dome light, that terminal has continuity to ground when the switch knob is turned completely counter clockwise which makes sense.
I have to be doing something wrong because both the new and the old do exactly the same thing and the old one worked before I ripped all the wiring apart.
