A833 lubrication

cudaspaz said

Not easy to fill with the squeeze bottles so I used a long clear tube and ran it inside the shifter hole and squeezed the bottles sitting inside the car.

It goes super slow and takes about a half hour to do it depending on diameter of your clear tube.
Expect your forearms to look like Popeyes after you finish.

Click to expand...

I used a clean 1-gal. oil jug, filled it with the proper gear oil (80W-90 GL-4). Then made two holes in the cap. Ran a 1/4" vinyl tube from an air regulator to the top of the jug. Another 1/2" vinyl tube from the bottom of the jug under the car and into the fill hole.

Apply 3-4 psi to the air input, sit back and wait until oil starts dripping. Still takes 15-20 min, but my forearms felt fine and can be used for working on other things while waiting :)

Caution: Do NOT attempt to speed up the process with more air. Once the bottom of the jug bulges out a little, that is plenty! Don't ask how I know. Actually don't ask my ex-wife's son :D