67 Barracuda front suspension
Got all my new suspension button up. I took the lazy way out and used a cut off wheel to get the old worn slant T-bars out. Everything went together well upper/lower control arms and PST T-Bars. Noticed one of my outer tie rods had excessive play. This snow balled into a hassle. First I bought new MOOG outers. So I thought, turns out I got one inner and one outer. No problem I continued to drive on. Well the ball joints are fused to the tie rod sleeves I soaked them with WD-40 no luck getting them to budge. So i decided to spend the money on the aluminum sleeves from PST $59 later. They don't seem to work with the Moog ball Joints; excessive play seems like the tolerance are off with the thread pitch. Probably should keep all brand specific with Moog ES319L's, ES319R's, and the ES319S sleeves. I think it will fit better in the end. Too bad because these PST sleeves are pretty nice.
Got all my new suspension button up. I took the lazy way out and used a cut off wheel to get the old worn slant T-bars out. Everything went together well upper/lower control arms and PST T-Bars. Noticed one of my outer tie rods had excessive play. This snow balled into a hassle. First I bought new MOOG outers. So I thought, turns out I got one inner and one outer. No problem I continued to drive on. Well the ball joints are fused to the tie rod sleeves I soaked them with WD-40 no luck getting them to budge. So i decided to spend the money on the aluminum sleeves from PST $59 later. They don't seem to work with the Moog ball Joints; excessive play seems like the tolerance are off with the thread pitch. Probably should keep all brand specific with Moog ES319L's, ES319R's, and the ES319S sleeves. I think it will fit better in the end. Too bad because these PST sleeves are pretty nice.
