Bell-housing alignment help
I need some help with my bell-housing alignment. I followed along with some YouTube videos and setup my dial indicator to rotate around the housing and then took measurements, twice. You will see the specifics in the photo below.
What I would like to know is now that I know how much it is off, how do I tell what direction to move it in and by how much?
Here are the readings going clockwise as you look at the bell-housing:
12 o'clock: .0
3 o'clock: +.058
6 o'clock: +.132
9 o'clock: +.084
Vertically I need to go +.066 towards 12 o'clock (up)
Horizontally I need to go +.013 towards 3 o'clock (right)
Together this means I need to move the bell-housing in the upper right direction. I just am unsure how much and in what specific direction.
I am using this Harbor Freight dial indicator that indicates in increments of .001.
I need some help with my bell-housing alignment. I followed along with some YouTube videos and setup my dial indicator to rotate around the housing and then took measurements, twice. You will see the specifics in the photo below.
What I would like to know is now that I know how much it is off, how do I tell what direction to move it in and by how much?
Here are the readings going clockwise as you look at the bell-housing:
12 o'clock: .0
3 o'clock: +.058
6 o'clock: +.132
9 o'clock: +.084
Vertically I need to go +.066 towards 12 o'clock (up)
Horizontally I need to go +.013 towards 3 o'clock (right)
Together this means I need to move the bell-housing in the upper right direction. I just am unsure how much and in what specific direction.
I am using this Harbor Freight dial indicator that indicates in increments of .001.