Bell-housing alignment help
Ok. Did it again, got different numbers. First, here is the best I could get the indicator.
You will notice the second set of numbers
12: 0
3: 41
6: 96
9: 61
Horizontally: need to move 10 towards 3 o'clock.
Vertically: need to move 48 towards 12 o'clock.
Here is my plan, I already have RobbMC .021 offset dowels on the way.
Pointing the offset toward 1:30 would move the vertical and horizontal 10 in the correct direction. Since 5 is the standard allowance I am going to point the dowels toward 12:45 which would give me 15 vertically and 5 horizontally. Thus making my numbers 33 vertical and 5 horizontal.
This is probably "good brought" since I know my numbers are a tad on the high side due to the angles of the indicator and 21 is the largest offset they make. At least I know I am going in the right direction to make it better.
Comments?
Ok. Did it again, got different numbers. First, here is the best I could get the indicator.
You will notice the second set of numbers
12: 0
3: 41
6: 96
9: 61
Horizontally: need to move 10 towards 3 o'clock.
Vertically: need to move 48 towards 12 o'clock.
Here is my plan, I already have RobbMC .021 offset dowels on the way.
Pointing the offset toward 1:30 would move the vertical and horizontal 10 in the correct direction. Since 5 is the standard allowance I am going to point the dowels toward 12:45 which would give me 15 vertically and 5 horizontally. Thus making my numbers 33 vertical and 5 horizontal.
This is probably "good brought" since I know my numbers are a tad on the high side due to the angles of the indicator and 21 is the largest offset they make. At least I know I am going in the right direction to make it better.
Comments?