TrickFlow 270's are in stock!

Deucemopar said
I take it the Edelbrock Victor Intake Manifolds 2886 doesn't fit?

Is the difference between MW and Regular intake square bore versus more oblong?

Thanks for help. We're using the 270s in our 431 build.

If the Victor doesn't fit out-of-the-box is it worth machining it or just use high rise intake you used in the pic/test? Or the Indy low deck MW 4150. 400-30

The Victor is a standard port intake so the port size is a lot smaller than the 270 head port. The bolt pattern is the same so the Victor will bolt on to the heads, but the port size is way off. Here is a picture of a 270 gasket on a 240 head.

DSC_0461 (Large).JPG