Heres engine specs.
Edelbrock Performer RPM intake manifold #7176
Engine Quest magnum cylinder heads, 62cc closed combustion chambers
10:2 compression ratio
2.02/1.60 Scorpion stainless steel intake/exhaust valves
Comp Cam beehive valve springs
Comp Cam rocker arm studs #4504-16, ARP polylocks #300-8241
Comp Cam 1.6 ratio adjustable rocker arms with roller tips #1416-16
Comp Cam pushrods
Felpro gasket set with Q1008 head gaskets
Mopar LA 360 engine block bored .030 over
Ross flat top forged pistons with full floating wrist pins #99627
Piston top .004 below deck, piston to cylinder head quench clearance .043 inch
Sealed Power moly piston rings
Eagle SIR forged steel connecting rods with ARP rod bolts #6123CB
Mopar cast iron crankshaft, external balanced with Mopar front damper
Standard sized tri-metal main and rod bearings
ARP crankshaft main bearing bolts #140-5001
ARP cylinder head bolts #144-3602
Mopar .528 Solid Cam and lifter set
Engine Pro double roller timing chain and gear set with 9 keyway adjustment
Mopar magnum timing chain guide set
Melling high volume oil pump, pickup tube, and drive #M72HV, 72-S2,IS-72
Kevko 6 quart oil pan with internal baffles #M302, M301-1