1970 duster slant six 8.25 rear swap
325/50-15 will fit with the offset spring hangers. With a little massaging to the wheel well lip so they don't hit.
You will have to cut off the spring perches and weld new ones on in the correct location.
If I were to do it again, I would do the spring relocation into the frame. The problem now is my 3" exhaust is in the way.
I just moved the front of the springs down 1 1/2" so I could use the upper holes on the caltracs, so the rear of the car sits a litle higher.
325/50-15 will fit with the offset spring hangers. With a little massaging to the wheel well lip so they don't hit.
You will have to cut off the spring perches and weld new ones on in the correct location.
If I were to do it again, I would do the spring relocation into the frame. The problem now is my 3" exhaust is in the way.
I just moved the front of the springs down 1 1/2" so I could use the upper holes on the caltracs, so the rear of the car sits a litle higher.
