Upper rear shock studs for a 69 Cuda

I'm going to take that plate/board up when the interior guy comes.....use that tool and tighten it up.....the owner came up with some photos for me.

View attachment 1715044198
That's a great pic!! It easily shows the stud nuts. Make sure that lock nuts are used because the shock continuously is pulling up and down on the stud. The up and down motion does two things: it forces the stud to come loose over time and (even worse) once a little loose the stud will wollow out the hole in the body then you have a real big problem.
PS - By plate/board are you referring to the vertical piece of sheet metal where the rear divider hinge (door) attaches??
treblig