Rocker adjuster

I'm not sure if this is a brand new build and hasn't ran before or you just switched the Rockers and are asking if you need new pushrods for them? For me I was running 273 rockers and then switch to the Hughes rockers and there wasn't much difference even with the 1.6 to one's. My adjusters are all the way in, I mean just barely out enough to keep the top of the pushrod cup from hitting the rocker itself. I would think the more out they are out the more room for failure? My 2...


Correct. And if they are far enough down, they won't oil. The oil will blow past the cup.