318 crank pulley correct size??

megavites said

Kuda
Its going in a 67 satellite. Heres pics of engine before pulling it along with water pump timing cover (marks on driver side)
and radiator with lower drivers side port.
Just realized alt. Is a two groove.
I think i just need the correct crank pulley cause it looks like this used to be an a/c car.
View attachment 1715058161View attachment 1715058162View attachment 1715058163View attachment 1715058164

Click to expand...

Ok, you have the later style timing cover which will cover your timing marks. I would find an older timing cover with timing tab for a 69 and earlier 273/3148/340...

Keep your vibration damper with the crank. If the timing marks are off, just find TDC with a piston stop, then mark the balancer where the pre 69 TDC timing mark is on the pre 69 timing marks.

You have the correct alternator brackets, but may want to consider a single groove pulley on the alt if it doesn't line up with the new water pump pulley...

i don't see any repro early pulleys, but put an ad up in the wanted section for a 67-69 water pump single groove pulley...

Then see if everything lines up....

Now you can get the proper molded upper and lower radiator hoses for the original style radiator which you are using...