CnP (coil near plug) for big blocks
I designed the brackets so the coils can be mounted at the valve cover angle (requires a 45 degree boot on the coil end of the spark plug wire) or the coils can be swung out and mounted so they are horizontal. When the coils are horizontal you can use a 90 degree boot on the coil end. The 90 degree boot is less expensive and easier to work with but the coils take up a little more room when mounted horizontal. Here are a couple of pictures showing the coils in the horizontal position. The bracket comes with both mounting positions so if a person gets this kit they can try both to see which they like the best. I think I'm going to run with the coils horizontal since I think it looks better but either will work.
I designed the brackets so the coils can be mounted at the valve cover angle (requires a 45 degree boot on the coil end of the spark plug wire) or the coils can be swung out and mounted so they are horizontal. When the coils are horizontal you can use a 90 degree boot on the coil end. The 90 degree boot is less expensive and easier to work with but the coils take up a little more room when mounted horizontal. Here are a couple of pictures showing the coils in the horizontal position. The bracket comes with both mounting positions so if a person gets this kit they can try both to see which they like the best. I think I'm going to run with the coils horizontal since I think it looks better but either will work.