318 MRL Stroker

stingerdart1972 said

Got a 600 proform that Mike sent with the motor, and I got the Carter fuel pump that was recommended to run....

suggestions on a fuel regulator ?

I will get some NGK plugs also got a part number for those ?

Any other suggestions for other parts ?

Must appreciated help on the info !!!

Click to expand...

I got a Holley regulator p/n 12-840 cause it matched up with my Mopar Performance valve covers and air cleaner.

If you don't want to spend that much, Summit has a quality regulator that I believe is made by Holley. P/N sum-3032. Both are adjustable 4.5 - 9#. I mounted mine on the inner fender well by the alternator and ran 3/8" steel line from the Carter fuel pump to the regulator. Try to use as much steel line as possible. I believe you will need a adapter as the output on the pump is 5/16"

Sorry, I don't know anything about Proform carbs, but they all follow the same principles :)

I just used the stock NGKs. Oreillys has them in stock or RockAuto. P/N 2635 GR4 gapped at .035 with the FBO ignition probably can gap at .040, but I used .035. I noticed a big difference with the NGK over the ACs that came with the engine.

I had to fabricate a throttle return spring as the intake has dual mounts for Magnum/LA but mine is an LA, which you shouldn't have that issue.